Solar

How much roof space do solar panels need in Northern Ireland?

Ten panels can cover roughly 20m², but that doesn’t mean ten will fit on any 20m² roof. The shape matters, along with roof windows, chimneys and the space needed around the array.

We start with a layout of the actual roof. Here’s a useful first check before we get that far.

How big is one solar panel?

Take the 480W AIKO Neostar 3S+54, model AIKO-A480-MCE54Db, as an example. Its manufacturer’s datasheet gives dimensions of 1,762 × 1,134mm. That is just under 2m² per panel: 1.762 × 1.134 = 1.998m². This is a sizing example, not a stock listing.

480W example: panel footprint only, rounded to the nearest square metre
PanelsArray ratingPanel area
83.84kWp16m²
104.80kWp20m²
125.76kWp24m²
167.68kWp32m²

The roof needs room beyond these footprints for the mounting layout, gaps and clearances. The kWp column is the rated size of the panels under standard test conditions, not their output throughout the day.

Why roof shape changes the answer

Put ten of those panels in two rows of five, in portrait, and the panels alone form a rectangle 5.67m wide by 3.524m up the slope. Gaps and clearances make the final layout larger. A long, narrow roof with the same total area might not take that arrangement.

We check each roof face separately. Hips and valleys cut into the usable shape. A roof window can break a row, and a chimney can take up space and cast shade. Turning panels to landscape may improve the layout, but the mounting system must allow the arrangement.

We don’t apply one blanket gap around every roof. The panel and mounting instructions, roof construction and site conditions determine the layout. Roof measurements are along the slope; a flat map view isn’t the same measurement.

Can we use more than one side of the roof?

Yes. You don’t need to squeeze everything onto one face. Our east Belfast case study shows a design spread across three roof faces. We use PV*SOL to model the layout and estimate how the different faces contribute through the year.

Direction, pitch and shading change the result. Our panel orientation guide explains those trade-offs. The useful comparison is what each layout is expected to generate and when the house can use it.

What about a small roof or a garage?

Compare watts as well as dimensions. Two panels taking up similar space can have different ratings. Higher efficiency can help on a tight roof, but it won’t make a panel fit through a roof window or remove a chimney’s shadow. Our AIKO Gen 3 guide covers the panel technology in more detail.

A garage or outbuilding is worth checking if the house has little usable space. We need to look at its roof condition, structure, shading and the cable route back to the house. Energy Saving Trust’s roof guidance also covers outbuildings and the extra structural considerations for flat roofs.

What to send us

Send your address, ground-level photos of the roof and a recent bill showing electricity use in kWh. Tell us about an EV or heat pump you have or are planning. There’s no need to climb onto the roof or measure it yourself.

We then compare what fits with what you use. Filling every available space isn’t automatically the best design. Our system-sizing guide covers the usage side; for an installation, see our solar panel options or ask us to check your roof.

Roof-space questions

Is 20m² enough for ten solar panels?

It is roughly the panel footprint for the 480W example here. You need additional space for gaps and clearances, and the roof shape must suit the layout.

Do all 480W panels have the same dimensions?

No. Check the datasheet for the exact model. Wattage alone does not tell you its length and width.

← All articles

Want to know what fits on your roof?

Tell us where the property is and what you have in mind. We’ll get in touch about a solar design for your home.

Prefer to talk? 028 9691 8755 — or see our solar installation service.

Call us Get a free quote